All of our wheels are built in house by our mechanics, all of whom have years of experience and hundreds of wheels under their belts.  We build an average of 8-10 pairs of custom wheels each week for track, fixed gear and road use.  We know what it takes to build a good, solid wheelset for any type of use!

 

Our wheels are hand laced and slowly brought up to tension.  We stress-relieve the wheel at least three times throughout the build process, and check each spoke individually to ensure even tension throughout the entire wheel.  The wheel will be dished (read: centered) so it sits in your frame evenly.  Yes, all of this takes longer, but it has its benefit in not requiring as much maintenance after the fact.  We guarantee that the finished wheel will leave here dished accurately, trued (side to side) within 0.5mm, round within 0.5mm, and ready to ride - with the addition of your rim strips, tubes and tires of course.

Take a look at or custom track wheel builder and roll away on a dream.... The prices quoted are for single wheels.  All prices and hubs are for 120mm (track standard) rear wheel spacing. If you would like 110, 126, 135, or any other spacing, give us a call and we'll help you find the right hubs.